Mold inside a wall cannot be cleaned from the outside, because the growth sits on the back of the drywall and on framing or insulation. A local company confirms the extent, removes affected material and dries the rest. Call the number on this page to be connected with a local mold company in Pompano Beach.

Trust your nose and your fingertips
Press gently along the base of the wall. Drywall that feels spongy, crumbles or looks darker than the paint above it has probably been wet for a while. Smell outlets and switch plates on exterior walls too. A sour or earthy note there, with no visible mold anywhere, is a common reason people end up calling for a wall check.
Plumbing inside the wall
Supply lines, drain lines, shower valves and ice maker lines all run through wall cavities. A pinhole or loose fitting can drip for a long time before it stains anything. Drywall wicks that water upward, and mold can start on the back of the board while the front still looks dry and clean.
Oceanfront and waterway homes face constant moisture in the air, which slows drying and lets a small wall leak linger far longer than it would farther inland.

The leak repair is a separate cost
Removing mold does not fix the pipe, window seal or stucco crack that fed it. Those repairs usually come from a plumber, window installer or stucco contractor, and many insurers ask for proof of the repair. Handling the source first keeps you from paying for the same wall twice.
Permits, flood maps and licenses in Pompano Beach
State law treats mold assessment and mold remediation as separate license types issued by DBPR. A quick license lookup is worth doing before you sign anything.
Expect two separate companies if you want both an assessment and remediation: state rules keep the assessor and the remediator apart on the same structure for 12 months.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the Pompano Beach Building Department.
If storm water was involved, your insurer and FEMA's flood maps can tell you how the address is zoned.
Nearby, the same kind of help is available in Lighthouse Point, Deerfield Beach and Coconut Creek.
Instruments and what they tell you
| Tool | What it shows |
|---|---|
| Moisture meter | Dampness in drywall and wood |
| Thermal camera | Temperature patterns that hint at wetness |
| Borescope | A look inside the cavity |
None of them replaces opening the wall when readings stay high.
The company picks the tool based on the wall, the finish and what you have already noticed.
Bleach and paint are not the answer
EPA does not generally recommend biocides like bleach for routine cleanup, and a coat of paint only hides the problem for a while. Mold that grows on the back of drywall will not respond to anything applied to the front. Removing the wet material and fixing the leak is what works.
Pompano Beach at a glance
Calls come in from across Pompano Beach, including around Old Pompano, Palm Aire, Garden Isles.
The city sits on the Atlantic with Intracoastal Waterway frontage at Hillsboro Inlet and an elevation of about 13 feet.
Mold in Walls questions in Pompano Beach
Do they have to tear out my whole wall?
Can I just clean the wall and paint over it?
What if the mold is in a shared condo wall?
Does a business that finds mold also have to hold a license?
More mold services in Pompano Beach
Mold in Walls nearby
Helpful guides
Sources
Last updated: