Florida requires mold assessors and mold remediators to hold state licenses issued through the Department of Business and Professional Regulation. You can verify a person's license yourself in a few minutes, and a separate state rule limits who can do both the assessment and the cleanup.
Who regulates mold work in Florida
Florida issues mold assessor and mold remediator licenses through the Department of Business and Professional Regulation, known as DBPR, under Part XVI of Chapter 468 of the Florida Statutes. Applicants must pass a state-approved examination. One detail surprises people: only individuals hold the license, not companies. That means a company advertising "mold services" is only as qualified as the named people doing the work.
We are a referral service. The number on this page connects you with an independent local mold company in West Palm Beach, but we do not hold licenses or do mold work ourselves. Verify whoever shows up using the steps below.
Two different licenses
- Mold assessor. Inspects, evaluates the extent of mold, may take samples and writes the plan, often called a remediation protocol, describing what should be done.
- Mold remediator. Carries out the cleanup or removal according to a plan.
The two roles are intentionally separate. Our guide on inspection versus testing shows how that plays out in practice, and the remediation process guide explains the steps that follow the plan.
The 12-month rule
Section 468.8419, Florida Statutes, creates a conflict-of-interest rule in both directions:
- A mold assessor may not perform or offer to perform mold remediation on a structure on which the assessor, or the assessor's company, provided a mold assessment within the last 12 months.
- A mold remediator may not perform or offer to perform an assessment on a structure where the remediator, or the remediator's company, provided mold remediation within the last 12 months.
The point is simple. Whoever writes the scope should not profit from making it bigger. If one company tries to do your inspection and your removal, ask how that fits the rule. The statute also contains an exception: the assessor restriction does not apply to a certified contractor classified as a Division I contractor under s. 489.105(3). So the answer is not always a flat no, which is why you should ask the question rather than assume. The state's own explanation lives on the DBPR mold FAQ page, and the statute is posted on the Florida Legislature's website.
How to check a license in five minutes
- Ask the company for the full name and license number of the assessor or remediator who will be on your job.
- Open DBPR's mold-related services page and use the license search. You can search by name or by license number.
- Confirm the license type matches the work: assessor for inspection and protocols, remediator for removal.
- Check the status and any disciplinary history shown on the record.
- Match the name on the record to the name of the person who actually arrives.
The wording to look for on the search is the specific mold license type, not a general business registration. A general contractor license, a business tax receipt or a county permit is not the same thing as a mold license.
What exemptions exist
Section 468.841 exempts persons acting within their authorized scope of practice under other federal, state or local codes or statutes. Anyone relying on that exemption must not hold themselves out for hire as a mold assessor or remediator. We did not find a square-foot exemption on the state pages we reviewed, so do not accept a claim that jobs "under a certain size" need no license without seeing it in writing. If a company says it is exempt, ask it to name the exemption.
The homeowner is a different case. EPA says that when the moldy area is less than about 10 square feet, in most cases you can handle the cleanup yourself. That advice is about your own home, not about hiring someone else. Our DIY versus professional guide covers the details.
Red flags worth walking away from
- No license number offered, or a number that does not match the person's name on DBPR's search.
- One company proposing to test and remove on the same property with no explanation of the 12-month rule.
- A fixed price quoted sight unseen.
- Pressure to sign the same day.
- No written scope, containment plan or moisture fix.
- A promise to "guarantee" mold will never return. Mold comes back when moisture does, so the real question is whether the water source gets fixed.
Our cost guide lists sourced price ranges so you can tell when a quote is far outside the norm.
Permits and the rebuild
A mold license does not cover building work. If cleanup leads to replacing drywall, electrical, plumbing or air conditioning components, that work may need a permit from your local building office. The City of West Palm Beach Building Division, for example, states that structural, electrical, mechanical, plumbing and gas work needs a permit regardless of cost. Outside the city, the building office depends on where you live: Palm Beach County handles unincorporated areas, Martin County has its own building department, and many Broward cities issue their own permits. Ask your contractor who pulls the permit and confirm with your local office.
What your license check does not tell you
A valid license shows that the person met the state's requirements. It does not tell you about workmanship, price or schedule. For those, get at least two written scopes, compare the line items and ask each company how it verifies that the job is complete. For the larger picture, see the full list of mold services, the West Palm Beach mold remediation page and our other guides.
Reading the report you receive
A useful report is specific. It names rooms, lists readings and photographs, identifies likely moisture sources and describes recommended work in terms you can compare between bidders. A report that says only "mold found, remediation needed" does not help you negotiate or verify anything. If the document recommends testing, ask why and what decision the results would change. If the answer is that results will not change the plan, the money may be better spent on the repair.
Keep the report. It is useful if you need to show an insurer, a landlord, an HOA or a future buyer what was found and what was done. For storm or flood water in particular, read about mold after a hurricane or flood, because timing matters there more than lab data.
Common mistakes to avoid
- Testing before fixing the leak. Samples taken in a wet house describe the wet house, not the problem you will have after repair.
- Buying a package that bundles an inspection with removal. Under the 12-month rule, the two roles are generally kept apart for the same structure.
- Treating one low reading as a pass. The CDC says there are no set standards for what is an acceptable quantity of different kinds of mold in a home.
- Skipping the written scope. Without one, you cannot tell afterward whether the work was done.
Questions to ask when two companies seem to be one
In practice, some firms employ both an assessor and a remediator, or share an owner with a separate company. The statute speaks of the assessor or the assessor's company, so the arrangement matters. Ask whether the company that wrote the report has any ownership, billing or referral link to the company proposing the cleanup. Ask for the answer in writing. A direct, plain reply is a good sign. Evasion is not.
It also helps to know your own side of this. If your property is a condo or a rental, the association or landlord may have its own vendor rules, and a unit owner can be responsible for some repairs and not others. The condo and rental guide goes through who handles what. Under s. 83.51, Florida Statutes, a landlord must comply with applicable building, housing and health codes during the tenancy, although the text we reviewed does not mention mold specifically.
Where to get help if something goes wrong
If you believe a person is offering mold services without the right license, or if someone who holds a state mold license did not follow the rules, DBPR is the agency that handles complaints about its licensees. Keep copies of the contract, the scope, photographs of the work and any messages. The Florida Department of Health does not provide mold testing, but it offers technical assistance, information and advice on identifying mold problems and cleanup methods, and directs people to their county health department's Office of Environmental Public Health, Radon and Indoor Air Program. For a general safety question about a home, a building official in your city or county is the right contact, and the guide on the clearance testing process shows how a job should end.
If you have health concerns, talk with your doctor.
Frequently asked questions
Who issues mold licenses in Florida?
How do I check a Florida mold license?
Can one company assess and remove the mold in my home?
Do I need a license to clean mold in my own home?
Sources
- Florida DBPR: Mold-Related Services FAQs
- Florida DBPR: Mold-Related Services license search
- Florida Statutes s. 468.8419: Prohibitions; penalties
- EPA: A Brief Guide to Mold, Moisture and Your Home
- City of West Palm Beach Building Division
- Palm Beach County Planning, Zoning & Building: Building Division
- Martin County Building Department: Do I need a permit?
Last updated: