Mold in a wall is usually found by tracing moisture, not by looking at the surface. A local company uses moisture meters and a thermal camera, then opens small inspection holes where readings are high. Call the number on this page to be connected with a local mold company in Gulf Stream.

A quick walk-through before you call
- Check under sinks and behind toilets for dampness.
- Run a hand along exterior walls below windows.
- Look inside closets that share a wall with a bathroom.
- Note any stain that has grown since you last looked.
- Write down where the smell is strongest.
Those notes help the company find the wet area faster.
Common sources and where they show up
| Source | Where it usually shows |
|---|---|
| Window or slider seepage | Below the sill, floor edge |
| Shower or tub valve leak | Wall behind and beside the tub |
| Stucco cracks | Exterior-facing room walls |
| Condensate overflow | Wall near the air handler |
The pattern of wet spots on a wall often gives away where the water is entering, which is why readings come before repairs.
Salt air and wind-driven rain along the coast push water into stucco cracks and window frames, and humid sea air keeps wall cavities from drying out between storms.

Questions that move the quote
- How many walls and rooms are involved
- Whether cabinets, tile or a tub surround must be pulled
- If the leak source is already fixed
- How hard the wall is to reach
- Whether rebuilding is included or separate
Ask each company to name what it is pricing, so the quotes line up item for item.
Removal, drying and the rebuild
Affected drywall and insulation are cut out and bagged, framing is cleaned or treated as needed, and fans or dehumidifiers dry the cavity. Many companies stop there and leave the closing and painting to a general contractor, so confirm who handles the rebuild before you sign.
Habits that protect your walls
- Look under sinks every few weeks.
- Re-caulk window and slider edges as they age.
- Keep gutters, drains and weep holes clear.
- Leave a few inches between furniture and exterior walls.
- Check walls after any heavy storm.
Small, regular checks cost little and often catch a wall problem long before a stain or smell shows.
Who handles what in Gulf Stream
Florida requires mold assessors and mold remediators to hold a state license through the Department of Business and Professional Regulation (DBPR). Ask for the license number and look it up before anyone starts.
Under Florida's 12-month rule, the company that tests or assesses a home generally can't be the one hired to remediate it, which keeps the scope honest.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the Highland Beach Building Department.
Flood zone and floodplain information for the area is available through Palm Beach County Planning, Zoning & Building, which helps when you're sorting out insurance or rebuilding after water got in.
Nearby, the same kind of help is available in Delray Beach, Highland Beach and Ocean Ridge.
Mold in Walls questions in Gulf Stream
Do they have to tear out my whole wall?
Should I test the wall for mold?
Is bleach a good way to treat wall mold?
Do I need a permit to open a wall for mold removal?
More mold services in Gulf Stream
Mold in Walls nearby
Helpful guides
Sources
Last updated: