Changing the filter will not remove mold from the coil, pan or ducts behind it. A local company can inspect those parts and explain what can be cleaned and what should be replaced. Call the number on this page to be connected with a local mold company in Delray Beach.

Look at the return side first
The return side pulls house air across the filter and coil, so dust and moisture collect there. Look at the filter for dark spots, check the return plenum, and see whether the grille has dark streaks. Growth on the return side often means the whole system has been moving it around.
Where moisture collects
Four parts of the system account for most problems.
| Part | Typical cause |
|---|---|
| Drain pan | Blocked line or rusted pan |
| Supply ducts | Torn insulation or leaks |
| Return plenum | Hot, humid air drawn in |
| Coil | Dirty surface that stays wet |
Coastal humidity in Delray Beach means the AC rarely gets a break, and wind-driven rain can wet attic ducts and registers during storms.

Home size is not the whole story
A big house with one air handler and short ducts may be a simpler job than a small one with several zones and long attic runs. Ask the company to describe the system they saw and what portion they plan to clean, so the quote reflects the equipment and not just the floor plan.
Useful local contacts for Delray Beach
Check the company's state mold assessor or remediator license on DBPR's search; Florida issues both license types.
Expect two separate companies if you want both an assessment and remediation: state rules keep the assessor and the remediator apart on the same structure for 12 months.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether the Delray Beach Building Division needs to be involved.
the Delray Beach Building Division offers flood zone details, worth checking if storm water or surge is part of the story.
Nearby, the same kind of help is available in Highland Beach, Gulf Stream and Boynton Beach.
Expect a plan, not just a spray
EPA does not generally recommend biocides like bleach for routine cleanup. A good scope covers removing growth, cleaning surfaces, fixing the water source and checking readings afterward. Be cautious about any offer that treats a quick fog or spray as the whole fix.
Humidity targets
EPA advises keeping indoor humidity below about 60 percent, ideally between 30 and 50 percent. Set the thermostat fan to auto so the coil can drain between cycles, and use a hygrometer to see how the house is doing. If it runs high, ask an AC contractor about dehumidification.
Delray Beach at a glance
Calls come in from across Delray Beach, including around Downtown Delray Beach, Tropic Isle, Addison Reserve.
The city lists tidal flooding, storm surge and heavy rainfall as local flood risks.
AC & Duct Mold Removal questions in Delray Beach
Do I need to clean my ducts if there is mold?
Will changing the filter fix a musty AC smell?
Do I need mold testing for the AC?
Can an air handler in the garage or attic grow mold?
More mold services in Delray Beach
AC & Duct Mold Removal nearby
Helpful guides
Sources
- City of Delray Beach Development Services - Building Division
- City of Delray Beach Development Services - Building Division: flood information
- Florida DBPR: Mold-Related Services FAQs
- EPA: Mold Cleanup in Your Home
- Florida Department of Health: Mold
- Delray Beach housing by year built
- Delray Beach: local background
Last updated: