Mold remediation referrals for West Palm Beach & nearby townsCall: (561) 680-4689
(561) 680-4689

Mold in Walls in Palm Beach Gardens, FL

westpalmbeachmoldremoval.net

Block walls, sliders, plumbing and AC condensation all send water into wall cavities in Palm Beach Gardens, and the mold follows quietly.

Baseboards swelling in your Palm Beach Gardens house?
Call now to be connected with a local mold remediation company in Palm Beach Gardens.
(561) 680-4689

Mold in a wall is usually found by tracing moisture, not by looking at the surface. A local company uses moisture meters and a thermal camera, then opens small inspection holes where readings are high. Call the number on this page to be connected with a local mold company in Palm Beach Gardens.

Stained and peeling wall near an exterior door, mold in walls in Palm Beach Gardens, FL

A quick walk-through before you call

  1. Check under sinks and behind toilets for dampness.
  2. Run a hand along exterior walls below windows.
  3. Look inside closets that share a wall with a bathroom.
  4. Note any stain that has grown since you last looked.
  5. Write down where the smell is strongest.

Those notes help the company find the wet area faster.

Storms and power outages

Summer storms push rain sideways into window frames and stucco seams. When the power goes out, a closed-up house loses its air conditioning and the indoor humidity climbs fast, leaving wet walls with nothing to dry them. Both situations are routine here, and wall cavities are where the aftermath tends to hide.

Salt air and wind-driven rain along the coast push water into stucco cracks and window frames, and humid sea air keeps wall cavities from drying out between storms.

Call now to be connected with a local mold remediation company in Palm Beach Gardens.
(561) 680-4689
Inspection opening showing mold inside a wall cavity, mold in walls in Palm Beach Gardens, FL

The leak repair is a separate cost

Removing mold does not fix the pipe, window seal or stucco crack that fed it. Those repairs usually come from a plumber, window installer or stucco contractor, and many insurers ask for proof of the repair. Handling the source first keeps you from paying for the same wall twice.

What a wall check usually involves

  1. Questions about past leaks and storm damage
  2. Moisture meter readings across suspect walls
  3. Thermal camera scan for cool, damp areas
  4. A small opening cut at the highest reading
  5. A plan that spells out what will be removed

Each step narrows down where the moisture sits, so the removal plan can stay as small as the damage allows.

Keeping humidity in check

EPA recommends keeping indoor humidity below about 60 percent, and ideally between 30 and 50. In a South Florida home that means running the AC regularly, using bathroom exhaust fans and not letting a closed-up house sit in the heat. Drier air makes a wall cavity far less welcoming.

Before work starts in Palm Beach Gardens

Check the company's state mold assessor or remediator license on DBPR's search; Florida issues both license types.

Florida also bars a company that assessed a structure from remediating it within 12 months, and the reverse, so the inspection and the cleanup usually come from two different businesses.

Rebuild work after the mold comes out, such as new drywall or framing, may need a permit; the Palm Beach Gardens Building Division is the office for Palm Beach Gardens addresses.

the Palm Beach Gardens Building Division offers flood zone details, worth checking if storm water or surge is part of the story.

Companies that take calls here usually also work in Riviera Beach, Lake Park and North Palm Beach.

Around Palm Beach Gardens

Calls come in from across Palm Beach Gardens, including around PGA National, Mirasol, BallenIsles.

The City states Palm Beach County considers all municipalities in the county to be in a flood hazard area.

Mold in Walls questions in Palm Beach Gardens

How can I tell if there is mold inside my wall?
Common signs are bubbling paint, a swollen baseboard, a soft spot at the bottom of the wall, a recurring stain or a musty smell with nothing visible. A local company confirms it with moisture readings and, when needed, a small inspection opening.
What is an inspection opening?
It is a small hole cut in the drywall to look at the back of the board and the cavity. It lets the company see whether mold is present before deciding how much to remove.
Who fixes the leak that caused the mold?
Usually a plumber, window installer, roofer or stucco contractor. The mold company removes the damage but does not repair the source.
Do I need a permit to open a wall for mold removal?
Requirements vary by scope and by town. the Palm Beach Gardens Building Division can tell you whether the repair work needs a permit, and the company can explain what applies to removal.

More mold services in Palm Beach Gardens

Mold in Walls nearby

Call now to be connected with a local mold remediation company in Palm Beach Gardens.
(561) 680-4689

Last updated:

☎ Call (561) 680-4689