If you can see mold or smell it but cannot tell what caused it, an inspection is the usual first step. Florida requires that the person assessing mold and the company removing it be separate for the same job. Call the number on this page to be connected with a local mold company in Lake Worth Beach.

Is it a one-person cleanup or a job for a company?
EPA says a homeowner can usually handle an area smaller than about 10 square feet once the moisture is fixed. Anything bigger, anything that keeps returning, or anything you cannot trace is a good case for having an assessor look first.
Following the water
Mold is the symptom; moisture is the cause. The assessor traces dampness back along a wall, up through a ceiling or down toward a slab edge until the source makes sense. That might be a pinhole supply line, a failed shower pan or a roof penetration above the room.
Close to the water, humid air and driving rain find small gaps. Expect the inspection to include exterior sealants, roof edges and the corners of impact windows.

Cost factors at a glance
- Square footage and number of floors
- Single room concern versus whole building
- Condo, house or commercial unit
- Distance from the company's base to Lake Worth Beach
- Whether a detailed written protocol is wanted
Useful local contacts for Lake Worth Beach
State law treats mold assessment and mold remediation as separate license types issued by DBPR. A quick license lookup is worth doing before you sign anything.
Under Florida's 12-month rule, the company that tests or assesses a home generally can't be the one hired to remediate it, which keeps the scope honest.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the Lake Worth Beach Building Division.
Palm Beach County Planning, Zoning & Building offers flood zone details, worth checking if storm water or surge is part of the story.
Companies that take calls here usually also work in Lantana, Hypoluxo and Atlantis.
If the assessor finds nothing
A clean finding is still a result. It means moisture readings were normal and no growth was seen in the areas checked. If the odor continues, discuss next steps, such as monitoring humidity, rechecking after rain or considering sampling in a specific spot.
Keep moisture from coming back
After an inspection, the work that matters most is fixing the cause. Repair leaks, clear condensate lines, vent bathrooms outdoors and keep indoor humidity below about 60 percent, which EPA says ideally sits between 30 and 50. Without that, any cleanup is temporary.
Mold Inspection questions in Lake Worth Beach
Do I need an inspection if I can already see mold?
How do I check that an assessor holds a state license?
Should I clean the area before the inspector comes?
Does salt air affect what an inspector checks?
More mold services in Lake Worth Beach
Mold Inspection nearby
Helpful guides
Sources
Last updated: